Please Read This! You may want to upgrade your browser.
You're using Internet Explorer 6 to browse Handi Quilter right now. Handi Quilter will work better for you, if you upgrade to Internet Explorer 8 or switch to another browser.
Can't control menus
Posted: Dec. 11, 2010, 6:14 PM
Last night I attached my micro-handles and I forgot to turn the machine off to attach the cable. Now the machine will come on, but I have no lights and no control of the screens. I have an HQ16, tilt-screen on the front handles, stitch regulator with an upgraded c-pod (when I purchased the micro-handles). The front screen reads Handlebar 3a, version 3.21. The back screen reads Handlebars version 2.1. Neither screen reacts to the pushing of the buttons.
I can access the screen on the c-pod (v 8.00 label on it when I upgraded) of the stitch regulator and step through options but no control of the lights. Last night after this first happened I would press the start button and it would stitch about 5 stitches and then stop on its own. I did still have lights last night. I turned everything off for 24 hours and when I came back tonight, I can get the needle to move up and down but I haven't tried to stitch anything since I have no lights.
I'm sure something just got out of sync when I plugged in the micro-handles, but how do I get it back in sync?
Thanks in advance for your help!