Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In with Facebook Sign In with Google Sign In with OpenID Sign In with Twitter

In this Discussion

Fusion alarm

In the training video it says that the fusion will sound an alarm and stop the machine when there is a thread break, but my fusion will only sound the alarm and not stop the machine. Is there a setting I need to have checked for it to stop on breakage


  • Quiltinginthekettles,

    The HQ Fusion will only sound an alarm if you are doing freehand quilting. If you are using the HQ Pro-Stitcher and have it turned on then the machine will stop. You do have to have it turned on in both the Fusion and the Pro-Stitcher. If you have it turned on and it is not stopping your Fusion please call our Technical Solutions team at 1-877-697-8458, M-F, 8-5 MDT.

    Good luck,

    Cheryl Duncan
    Handi Quilter Studio Educator

  • Yay, it works. Turned out I only had the alarm on the fusion turned to on. Went to the settings on the Prostitcher, and sure enough that wasn't turned on. Lovin my Fusion
Sign In or Register to comment.